The rotation disk determination angle. For example the calibrated
dial, the model, the gauge, the drill hole template and the
geometric shape complex components of angle measurement.
Serves as a microscope, working with superficial quality by the
comparison test inspections, the appraisal of metallurgical
industry ore specimens. The printing of photography allows for
lithograph plates of examination textile fibers and so on.
3
4
2.
3.
1.3 Mainframe technical parameters:
1.3 Mainframe technical
parameters:
1: 6.5 (0.7
×－
4.5
×
)
Total magnification
18.7
×－
120
×
( 4.7
×－
240
×
can be
obtained with varied accessories )
Digital amplification
1.0
×－
4.0
×
Display screen
8.4 inch TFT LCD ( display screen
resolution 800
×
600 pixels )
CMOS sensor
3.0 MEGA pixels
Working distance
88mm
Size of field visual
4.4 x 5.7-27.2 x 35
Zooming mode
Transverse axis continual
magnification change
AC adapter
100
－
240 V / 50
－
60 Hz the working
power of the mainframe: 12VDC 3A
Auxiliary lens
0.5X Ocular, 0.75X auxiliary Lens
Illumination
LED ring light
Ⅱ
.
Installation
The ISM-DL120 host and its support are disassembled for packaging.
Please open carefully the packing box and take out the instrument
and accessories (for detail, refer to the packing list). Then, connect
the dove-tail groove at the rear base of the machine with that at the
upright column prior to the next step operation.
2.1 Installation
The dove-tail groove on
trestle
The dove-tail groove on
mainframe
Connect the dove-tail
groove together table
2.2 Attention
During installation, it is not allowed to touch the surface of the
optical parts and the surface of LCD screen directly with hand.
The image quality may be affected if the optical kits are stained
with figure print or greasy stain. As to the dirt on the surface of
optical kits and LCD screen, please carry out treatment according
to maintenance of instrument introduced.
2.3 Preset adjustment
Select the operation distance of the machine by rotating the
focusing hand wheels. The tightness of focusing hand wheels
may be adjusted through left/right focusing hand wheels by
hands in inverse direction. The focusing resistance is rather
strong if it is too tight while the machine may easily drop if it is
too loose. The users may adjust by themselves according to
the practical requirements.
