11
12
As to the photo or video, it is available to change over to real time
mode or playback mode for the shooting information with the help
of
. At the mode of playback, it is available to delete single photo
or to delete all the information. With the microscope placed at the
mode of playback, it is available to use USB connection line to
transfer the data to the computer.
At the playback station, with the help of the
function menu, it is
available to carry out the setting as following:
3.10 Rear input / output ports
①
. it is available to connect through AV Out port of the microscope
image to the Monitor in real-time.
②
. Power Out is a power supply port to connect the bed light source.
③
. Power In is a connecting port for the main system power supply.
(12VDC 3A)
④
. SD/MMC port is an interface to insert SD memory card.
(Warning: Before pull out the SD card, please turn off the system)
⑤
. USB port is used for the data communications.
3.11 USB data communicate
when the system is on the playback station, use USB connection line
to transfer the data to the computer.
When the system is on the real time view station, use USB connect
the computer. It can view the real time image in the computer by
software.
The Screen show after connect the
Open the software “Impression 4”
computer
