11
10
IMPORTANT SAFETY INFORMATION
Fire Hazard:
To minimise possibility of fire, DO NOT store
flammable items such as rags, paper or aerosol cans near the
tank. DO NOT store or use petrol or other flammable vapours
and liquids in the vicinity of this or any other appliance.
Leak Hazard:
Regularly inspect tap and plumbing fittings
for leaks, which can cause property damage and could
result in personal injury.
A steaming hot water tap, like any water heater, has a limited life and will
eventually fail. To avoid possible property damage and personal injury,
this steaming hot water tap should be regularly examined for leakage and/
or corrosion and replaced when necessary. A drain pan, plumbed to an
appropriate drain or outfitted with a leak detector, should be used in those
applications where any leakage could cause property damage.
n
Use this water heater only for its intended use as described in this manual.
n
This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
n
Do not operate this product if it has been or appears to be damaged in
any manner or after the product malfunctions, or is dropped. Return the
complete product immediately to your retail dealer for inspection, and
if necessary, adjustment or repair.
n
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
Important:
Always arrange the power cord so that it cannot come in contact
with hot surfaces.
n
Do not disconnect the product from the power supply by pulling on the cord.
n
Do not use the product for other than its intended use as described in
these instructions. The use of accessory attachments other than those
recommended by the manufacturer may cause safety hazards.
n
The recommended connection may be made to an existing cold water line
with a branch terminating with a shutoff valve, a pressure relief and dual
check non-return valve sited adjacent to the product.
Electric Shock Hazard:
To reduce the risk of electric shock,
do not immerse or expose the product, flexible cord or plug to
rain, moisture or any liquid or when standing in or on damp
or wet surfaces. If any electrical product falls into water,
UNPLUG it immediately. DO NOT REACH INTO THE WATER.
Important:
Prior to reconnecting to the power supply, the
product should be inspected by a qualified technician.
To reduce the risk associated with the ingestion of
contaminants: Do not use with water that is microbiologically
unsafe or of unknown quality without adequate disinfection
before or after the system.
Personal Injury/Property Damage:
To reduce the risk
associated with hazardous voltage due to an installer drilling
through existing electric wiring in the area of installation: Do
not install near electric wiring which may be in path of a drilling
tool when selecting the position to mount the system bracket.
Also avoid the risk of drilling into water pipes which may
result in property damage.
This appliance must be earthed (grounded).
This steaming hot water tap is
equipped with a cord that has a grounding conductor and earth ground pin. The
plug must be connected to an appropriate outlet that is properly installed and
earthed (grounded) in accordance with all local codes and ordinances. Do not
modify the plug provided with the appliance – if it will not fit the outlet, have a
proper outlet installed by a qualified electrician. Check with a qualified electrician
or tradesman if you are in doubt as to whether the steaming hot water tap is
properly earthed (grounded).
Electric Shock Hazard:
Using an ungrounded (no earth
ground) or improperly connected appliance can result in
serious injury or death from electrical shock.
To reduce the risk associated with choking: Do not allow
children under 3 years of age to have access to small parts
during the installation of this product.
Personal Injury/Property Damage:
This tank is a non-
pressurised tank. DO NOT modify this system. DO NOT
close vent tube or connect other types of taps or valves to
the tank. Use only the InSinkErator tap supplied. Use only
parts provided. Contact an authorised InSinkErator Service
agent for repairs or replacement components.
Property Damage:
To reduce the risk associated with
property damage due to water leakage or flooding, and to
ensure optimal performance:
• Read and follow Use Instructions before installation and use
of this system.
• Installation and use MUST comply with all state and local plumbing codes.
System Requirements (Hot Water Tank, Filtration System and Tap):
• The flexible vent and outlet tubes must be correctly connected to
the tap supplied by the manufacturer. They must not be
obstructed or connected to a normal type tap or any other type.
• Do not install on hot water supply lines. The maximum operating water
temperature of this system is 37.8°C. Attach to cold water supply only.
NOTICE
