www.insigniaproducts.com
18
60" Espresso TV Stand
STEP 10 - Attach the door.
You’ll need
1
Put the pre-assembled rollers (
ZA
) on the bottom of the door (
19
) into the groove on the bottom panel (
2
).
2
Make sure that the latches (
ZB
) are unlocked.
3
Insert the latches into the groove on the top of the door (
19
), then push the latch sliders into the locked position.
4
Make sure that the door slides freely. If the door does not slide freely, loosen the screws in the center of the rollers, turn
the rollers clockwise slightly, then tighten the screws. Test the door movement again.
You’re done! Clean your stand with a damp cloth, then wipe it dry.
19
Door (1)
Phillips screwdriver
The following parts are pre-installed.
ZA
Roller
ZB
Latch
BACK VIEW
Locked
Unlocked
BACK VIEW
