www.insigniaproducts.com
7
NS-HF2003
Assembly instructions
STEP 1 - Install the dowels and cam screws.
You’ll need
1
Put a drop of glue in each dowel hole, then insert about 2/3 of each dowel (
B
or
E
) into the hole. Use a rubber mallet, if
needed. Install the dowels (as shown). For more information see Installing dowels on page 6.
2
Screw the cam screws (
C
) into the cam screw holes (as shown). For more information, see Installing cam locks and cam
Top panel (1)
Middle crossbar (5)
Left side panel (6)
WARNING:
You need two people to assemble your TV stand.
A
Glue (1)
B
Large wood dowel (16)
E
Small wood dowel (6)
Rubber mallet
C
Cam screw (21)
