www.insigniaproducts.com
13
NS-HF2003
STEP 6 - Attach the back panel.
You’ll need
1
Align the screws on the back panel (
3
) with the screw holes on the back of your stand.
2
Align two mounting tabs (
WC
) with the holes on the top of each corner of the back panel as shown.
3
Insert two wood screws 3 × 16 × 8 mm (
L
) through the mounting tabs and into the back of your stand. Tighten the
screws.
4
Align two wire management strips (
M
) horizontally with the center holes on the back panel as shown.
5
Insert two wood screws 3 × 16 × 8 mm (
L
) through the wire management strips and into the back of your stand. Tighten
the screws.
6
Secure the back panel to your stand with 19 wood screws 3 × 16 × 8 mm (
L
).
3
Back panel (1)
L
Wood screw 3 × 16 × 8 mm
(23)
M
Wire management
strip (2)
WC
Mounting tabs (2)
Note:
WC is part of the
Anti-Tip Safety Kit
Phillips screwdriver
L
WC
WC
