www.insigniaproducts.com
17
NS-HF2003
STEP 9 - Insert the shelf and drawers.
You’ll need
Inserting the shelf
1
Select the level where you want the shelf to sit. You can select from three positions.
2
Insert the four shelf pins (
P
) into the holes inside your stand. Make sure that the pins are on the same level.
3
With the front trim facing you, insert the shelf above the tabs, then lower the shelf onto the tabs.
Inserting the drawers
1
Slide the ball bearing plates on the left and right drawer side panels to the front of your stand.
2
Align the rails on the drawers with the ball bearing plates, then slide the drawers into your stand.
Removing the drawers
• Pull the drawer out until you can see or feel the black nylon clips on the ball bearing plates, then at the same time, push
the right clip down, the left clip up, and pull the drawer out of your stand.
P
Shelf pin (4)
12
Adjustable shelf (1)
Ball bearing
plates
Front
Nylon clip
Front
Nylon clip
Front
