4
Insignia NS-A1111 5-CD Shelf System
www.insignia-products.com
Object and liquid entry
Do not push objects through any openings in
your shelf system because they may touch
dangerous voltage points or short out parts that
could result in fire or electric shock. Never spill or
spray any type of liquid into your shelf system.
Damage requiring service
Do not try to service your shelf system yourself.
Opening or removing covers may expose you to
dangerous voltage or other hazards. Unplug
your shelf system from the power outlet and
refer servicing to qualified service personnel
under the following conditions:
•
When the power supply cord or plug is
damaged.
•
If liquid has been spilled, or objects have
fallen, into your shelf system.
•
If your shelf system has been exposed to rain
or water.
•
If your shelf system does not operate
normally by following the operating
instructions. Adjust only those controls that
are covered by the operating instructions
because an incorrect adjustment of other
controls may result in damage and will often
require extensive work by a qualified
technician to restore your shelf system to its
normal operation.
•
If your shelf system has been dropped or the
cabinet has been damaged.
•
If your shelf system exhibits a distinct change
in performance.
Replacement parts
When replacement parts are required, make
sure that the service technician uses
replacement parts specified by Insignia or those
that have the same characteristics as the
original part. Unauthorized substitutions may
result in fire, electric shock, or other hazards.
Safety check
Upon completion of any service or repairs to
your shelf system, ask the service technician to
perform safety checks to determine that your
shelf system is in correct operating condition.
Heat
Locate your shelf system away from heat
sources such as radiators, heat registers,
stoves, or other products (including amplifiers)
that produce heat.
Disc slot
Keep your fingers clear of the disc slot as it is
closing. You may injure yourself.
Disc
Do not use a cracked, deformed, or repaired
disc. These discs are easily broken and may
cause serious personal injury and product
malfunction.
Equipment classification
This is classified as Class II equipment, which
means that the shelf system has a
double-insulation system.
F
Invisible laser
radiation
possible when
open and
interlock failed or
defeated. Avoid
direct exposure
to laser beam.
Laser safety
This shelf system employs an optical
laser beam system in the CD
mechanism designed with built-in
safeguards. Do not try to disassemble.
Refer to qualified service personnel.
Exposure to this invisible laser light
beam may be harmful to the human
eye.
This is a Class-1 laser product. Using
controls, adjustments, or procedures
other than those specified herein may
result in hazardous laser light beam
exposure.
NS-A1111_final_translationDTP.fm Page 4 Friday, February 17, 2006 12:09 PM
