Inseego 5G Home Router 1A, Руководство пользователя

Страница: 46 / 61

5G HOME ROUTER 1A USER GUIDE 44
4. If you want to define your own application, use the Custom Applications area (see steps
below).
NOTE: You need to know the ports and protocol (TCP, UDP) used by the application for
incoming traffic.
5. Click Save Changes.
To turn off port forwarding, so that any application can connect to the Internet, click OFF on the
On/Off slider.
To add a custom application:
1. Click Add Custom Application to add a new row to the custom services list. (You can add up
to ten custom services.)
NOTE: Add Custom Application is available only when the port filtering is turned on.
2. In the Service Name field, enter a name for the custom service.
3. In the IP Address field, enter the IP address of the device you want to direct traffic for the
service to.
TIP: To find the IP address of a device, go to the Connected Devices page.
4. From the Port Type drop-down list, choose Range or Translate.
5. Specify port numbers:
• For range ports, use the From and To fields to specify the range of port numbers used by
outgoing traffic for the custom application.
NOTE: If the application uses a single port instead of a range, type the same value in both
the From and To fields.
•
For translate ports, use the Ext. and Int. to specify ports.
6. From the Protocol drop-down list, select the protocol used by the port range. Choose from
Transmission Control Protocol (TCP), User Datagram Protocol (UDP), or both.
7. Select the On checkbox if you want your new application to be able to access the Internet.
8. Click Save Changes to save any changes made to the custom applications.
To delete a custom application, select the Delete checkbox for its row, and click Save Changes.
NOTE: Click on the Port Forwarding tab again to remove deleted custom applications from view on the
screen.