LinkPower
LPS1000 Adjustable Voltage PoE Switch
Page 29 of 71
2.4 Ethernet Surge Supression
The LPS1000 is designed with durability and reliability. The built-in Ethernet Surge
Suppressor is purpose built to protect Ethernet enabled electronics and equipment from
lightning and harmful transient voltages. It is designed with low impedance and insertion loss
to minimize data packet loss and information integrity as it travels across the lines. Polymer
data line protection allows data transmission speeds up to 100 mbps. The following table
references the Ethernet port protection specification.
Specification
Rating
Maximum Operating Voltage
60VDC
Data Clamp Voltage
7.5 VDC
Power Clamp Voltage
60 VDC
Data Transfer Rate
100 mbps
Protection Mode
Line-Line and Line-GND
Response Time
< 5 ns
Max Shunt Capacitance
< 25 pF
PoE Pins Protected
All 8
Peak Pulse Current (10/1000uS)
Pins: 1,2,3,6 =132A
Pins: 4,5,7,8 = 100A
RJ45 Port
Metal, Shielded
