Inrevium TD-BD-SDCMPTestC, Руководство пользователя

Страница: 48 / 71

TD-BD-SDCMPTestC User
’
s Manual
48
Rev.1.01
Table 7-3 AutoTest operation
step operation Details
1 SD Initialize SD initialization is executed by default setting.
2 Card Check
It is checked whether insertion or remove of the SD card and support
information on the card is confirmed.
3 Default Setting
The voltage setting, the clock setting, and the delay setting are put into the
default setting.
4 SD Initialize SD initialization is executed.*1
5 SD Erase Erase of SD Card is done by specified address and size of the block.
6 Test Setting
It sets it in the state that the voltage setting, the clock setting, and the delay
setting are set by the dialog.
7 SD Write
Writing to SD Card is executed using specified address, size of the block,
and data pattern.
8 Default Setting
The voltage setting, the clock setting, and the delay setting are put into the
default setting.
9 SD Read
Read from SD Card is executed using specified address and size of the
block.
10 Data Verify
It checks whether the value written in step 7 and the value read in step 9
are identical.
*1: It is possible to skip
“
SD Initialize
”
operation by setting
“
Skip Initialize
”
.