TD-BD-SDCMPTestC User
’
s Manual
35
Rev.1.01
7.2.3.3. Clock Settings Tab
Figure 7-9 shows a GUI window of the
Clock
settings tab.
Figure 7-10 Clock Settings Tab
This tab allows the user to set the clock output to an SD Memory Card. The following describes
each parameter setting:
Clock Duty
This parameter sets the clock duty ratio. The user can run a test within the range from
Min to Max values that have been defined using this tab. A five-stage duty ratio value is
available depending on clock frequency. The operation mode, operation frequency and
available duty ratio values corresponding to each operation mode are shown in Table 7-1.
Clock Frequency
The clock frequency is a fixed value depending on the corresponding operation mode.
For relation between operation mode and frequency, see Table 7-1.
Clicking the
Default
button sets Clock Duty to Min to Max (depending on frequency) .
