INOXPA BCI Series, Инструкции по установке, обслуживанию и техническому обслуживанию

Страница: 12 / 20

Start-up
12
INOXPA S.A.U.
20.005.30.01EN · (0) 2019/02
6. Start-up
The start-up of the agitator can be carried out provided the instructions indicated in the chapter 5.
Installation have been followed.

Check that the power supply matches the rating indicated on the motor plate.

Check the alignment of the agitator shaft.

Check the level of fluid in the tank. When not specified in the order, the agitator cannot be operated
during the filling or emptying of the tank.
The agitator can NEVER operate without fluid. The agitation elements may only be submerged to a
height equal to 1,5 times its diameter.

All the guards must be in place.

Start up the agitator.

Check that the direction of rotation of the propellers is correct (it must rotate clockwise when see form the
drive side). See the next figure:
Follow the direction of rotation of the agitation components as indicated by the arrow attached to
the engine. An incorrect direction of rotations results in a loss of agitation performance.

Check the electrical consumption of the motor.
ATTENTION
20
.0
05
.32
.00
04