Installation
8
INOXPA S.A.U.
20.005.30.01EN · (0) 2019/02
5. Installation
5.1. RECEPTION OF THE AGITATOR
INOXPA is not liable for any deterioration of the material caused by its transport or unpacking.
Visually check that the packaging has not been damaged.
If the agitator is supplied without a drive or other element, the purchaser shall be responsible for its
assembly, installation, start-up and operation.
When receiving the agitator, check the packaging and its content to ensure that it matches the delivery note.
INOXPA packs the agitators in their fully assembled form or disassembled on a case-by-case basis. Ensure that
the agitator has not been damaged in any way. If it is not in good condition and/or any parts are missing, the
carrier must submit a report as soon as possible.
The following documentation is included with the agitator:
shipping documents,
instructions and servicing manual for the agitator,
instructions and servicing manual for the gear-motor when the agitator is supplied with a motor by
INOXPA.
5.2. IDENTIFICATION OF THE AGITATOR
The agitator is identified using a rating plate fixed onto the motor. The type of agitator and the serial number
appear on the nameplate.
Serial number
2
0
.0
0
5
.3
2
.0
0
0
2
