background image

Home

3/18/15 06443E © 2015, Inovonics - www.inovonics.com

 

13

2.1.1  System Connection Summary

The system connection summary fields on the home screen allow the system 
to be viewed at a glance.

• The “Devices Registered” field displays the total number of devices 

registered to the EN6080 area control gateway. 

• The “Devices In Alarm” field displays the number of registered devices 

that are in alarm. 

• The “Devices Inactive” field displays the number of registered devices 

that are inactive. A device is considered inactive if the EN6080 area 
control gateway has not received a check-in message from the device 
during the supervision window, indicating the radio link has been broken.

2.1.2  Device Information

The device information table (located below the system connection summary) 
displays an overview of each registered device. All columns are sortable; 
simply click on any column header to sort in ascending or descending order. 
The search field can be used to locate specific devices; it covers data in all 
fields, and accepts letters and numbers, but no wildcard characters.
The following information is included:

• The “TX ID” field displays the factory coded unique identification number 

of the transmitter. The TX ID is primarily used for registration.

• The “Device Status” field displays whether the device is active or inactive. 

A device is considered active if a check in message has been received 
during the programmed supervision period, indicating the radio link is 
sound.

• The “Alarm State” field displays whether or not the device is in a state of 

alarm.

• The “Type” field displays the Inovonics model number and device type.
• The “Description” field displays the user defined description of the device. 

Typically, this is a brief indication of where the end device is used, or, in 
the case of a mobile device, the name of the person to whom it is 
assigned.

• The “Partition” field displays the user defined area to which devices are 

assigned as a single entity. For instance, “front door,” or “lobby.” Placing 

Содержание EN6080



















































Отзывы: