Inovonics EN6080, Руководство пользователя

Страница: 10 / 50

EN6080 Area Control Gateway Overview
3.18.15 06443E © 2015, Inovonics - www.inovonics.com 9
4.
For each of those entries in the Interfaces folder, create two DWORD
registry keys called TCPAckFrequency and TCPNoDelay.
Figure 1-3 Create DWORD registry keys
Here’s an example what it should look like:
Figure 1-4 Edited entry example
5.
Double-click on each new registry key and change the value from 0 to 1.
(Base hexadecimal.)
6.
Exit the registry editor.
7.
Reboot your PC.
1.3.2 Configure Network Settings (for Windows 7)
The EN6080 area control gateway comes from the factory configured with a
static IP address of 192.168.60.80. To initially communicate with the EN6080
area control gateway, you will need to connect to a computer's Ethernet port.
This might mean disconnecting from your LAN.
To connect to the EN6080 area control gateway, you will first need to configure
the network settings on your computer.
Note:
This procedure will change your network settings. Make a note of your current
network configuration, so you can return to it when finished interfacing with the
EN6080 area control gateway.
1.
From the control panel, click “Network and Internet.”
2.
Click “Network and Sharing Center.”
3.
Click “Change adapter settings.”
4.
Right click on the local area connection used to connect to the network,
and select “Properties.”