Inovonics EN6080, Руководство пользователя

Страница: 34 / 50

Device Setup
3/18/15 06443E © 2015, Inovonics - www.inovonics.com 33
6.2.1 Start Discovery
To discover devices by automatic administration:
1.
Click “Start Discovery” to start discovery mode. During discovery mode,
all unregistered end devices from which a reset message is heard will
populate in the discovered devices field.
2.
Press the reset button on all devices which you wish to register.
Note:
For specific information about the location of device’s reset button, refer to the
installation instructions for the device you are registering. All installation
instructions are available at www.inovonics.com.
3.
When you have discovered all the devices to be registered, click the “Stop
Discovery” button.
6.2.2 Edit and Register the Devices
Once devices are discovered, they must be registered to include a description
and supervision window.
4.
All of the devices discovered in the last session will be highlighted in
green, indicating they are ready to be registered. If you do not wish to
register a device at this point, click anywhere in the device’s field to
deselect it.
5.
Click the “Edit” button.
6.
Enter a text description (32 character or less) of the end device in the
“Description:” field. Typically, this is a brief indication of where the end
device is used, or, in the case of a mobile device such as a panic button,
the name of the person to whom it is assigned.
7.
In the “Supervision Window:” field, enter a supervision window for the end
device in seconds.