Inovonics DAVID IV 719 N Скачать руководство пользователя страница 10

Страница: 10 / 61

— 6 —

Optional “Diversity Delay” of the composite multiplex

and FM-mode line outputs to synchronize analog FM and

digital broadcasts.

Internal RDS subcarrier combiner includes built-in meter-

ing to obviate the need for specialized monitoring

equipment and closed-loop servo stabilization of the MPX

output peak level.

Built-in test-tone generator to simplify setup.

Low latency allows off-air monitoring.

The DAVID IV boots or resets

in less than one second

and

draws only 8 watts from the AC mains.

Processing

Attributes

User-adjustable

processing

attributes of DAVID IV that directly

influence the ‘sonic signature’ of program audio processing:

An adjustable, steep high-pass filter attenuates unwanted

sub-bass program components.

Dual-slope “windowed” AGC automatically corrects wan-

dering levels from the console or playout system, main-

taining long-term consistency between diverse program

sources without altering the intended tonal balance.

5 bands of dynamic range compression and equalization

help create a ‘sonic signature’ tailored to the station’s

format and personality.

Low-bass augmentation gives independent control over

both the transient and the sustained program bass ele-

ments.

Stereo-enhancement options address both the apparent

width of the stereo image as well as solo (center channel)

fullness.

‘Look-ahead’ final limiting includes Inovonics’ proprietary

PIPP™ limiter technology to assure unprecedented modu-

lation efficiency.

Support for the European ITU-R BS.412.9 Standard with

flexible, automatic control of r.m.s. power in the compo-

site, multiplex output.

Содержание DAVID IV 719 N






























































Результаты поиска

Содержание DAVID IV 719 N

Отзывы:

Похожие инструкции для DAVID IV 719 N

Бренды по названию

Популярные бренды

Inovonics DAVID IV 719 N, Инструкция по установке и эксплуатации

Результаты поиска

Содержание DAVID IV 719 N

Отзывы:

Похожие инструкции для DAVID IV 719 N

Бренды по названию

Популярные бренды