Inovonics DAVID IV 719 N Скачать руководство пользователя страница 25

Страница: 25 / 61

— 21 —

Section III

GETTING READY

This section of the manual introduces the initial steps for get-

ting the DAVID IV set up for operation, and discusses certain

implications of the many audio processing adjustments. Please

refer back to the previous section for information on the physi-

cal interconnection of the unit with other station equipment.
In all discussions of DAVID IV operation, we assume the gen-

eral signal-path order indicated by the Block Diagram on Page

10. As stated in its own introduction, the Block Diagram does

not necessarily reflect the actual signal path or even the real

order of audio processing stages.
Most setup and operating instructions are going to assume use

of the Web interface, rather than the more laborious front-panel

menu and jog-wheel knob. Not only is the Web interface faster

and easier (entering text, for instance), but some firmware set-

up functions are adjustable only through the Webpages.
Nevertheless, very nearly anything that can be done through the

Web interface can also be set or adjusted from the front panel.

There are differences between the two menu structures, but

both menus are quite intuitive, and a full listing of the front-

panel menu tree can be found at the back of the manual on

Page 55. Manual text will make mention of any major discrep-

ancies in the appropriate places.

USER ADJUSTMENT GROUPINGS

Setup

Adjustments

Setup

adjustments are those performed as the unit is placed in

service and then largely left alone. These include input/output

gains and levels, networking and security settings.

Setup

ad-

justments are more relevant to the hardware aspect of the

DAVID IV, not to be confused with processing presets.

Setup

adjustments are automatically saved in non-volatile

memory as they are made. They are relevant to the specific in-

stallation and should be the dominion of the engineering staff.

Processor

Settings

Processing

Presets

(all settings related to processing) will de-

termine how the station sounds, as opposed to the technical

considerations of modulation, subcarrier injection, etc. Re-

sponsibility over these subjective adjustments will doubtless

have to be shared with the Program Director or station man-

agement because of their intuitive and unassailable skill in

such matters.

Содержание DAVID IV 719 N






























































Результаты поиска

Содержание DAVID IV 719 N

Отзывы:

Похожие инструкции для DAVID IV 719 N

Бренды по названию

Популярные бренды

Inovonics DAVID IV 719 N, Инструкция по установке и эксплуатации

Результаты поиска

Содержание DAVID IV 719 N

Отзывы:

Похожие инструкции для DAVID IV 719 N

Бренды по названию

Популярные бренды