Inovonics DAVID IV 719 N Скачать руководство пользователя страница 17

Страница: 17 / 61

— 13 —

shield grounds and the AC power cord ground. A ‘ground-

lifting’ AC adapter may well remedy such a situation, although

the chassis must somehow be returned to earth ground for

safety. Generally, being screwed-down in the equipment rack

will satisfy the safety requirement.

PROGRAM LINE INPUTS

AES Digital

Input

The female XLR connector labeled

AES DIGITAL INPUT

is a bal-

anced, transformer-coupled digital stereo program input con-

forming to the AES3 (AES/EBU) specification. This input ac-

cepts digital audio signals up to 24 bits in word length, and at

sampling rates of 32kHz, 44.1kHz, 48kHz and 96kHz. The on-

board sampling rate converter (SRC) locks onto the input signal

automatically and gives a display of the data rate on the

Now

Playing

and

Setup

Webpages, and in the front-panel

Setup / Sam-

ple Rate Converter

menu.

The digital input will accept average program levels between

–5dBFS and –35dBFS, presupposing a nominal, “zero-VU” aver-

age level close to –20dBFS. Gain is programmed in Setup.

Analog

Line Inputs

The DAVID IV has electronically-balanced (transformerless) left-

and right-channel

ANALOG INPUTS

with female XLR connectors.

These are bridging, high-impedance inputs. They do not pro-

vide termination for the console or other equipment that feeds

the DAVID IV. Here’s why.

With few exceptions, audio line impedance matching is ridi-

culed by today’s hip broadcasters (you) and erudite equipment

manufacturers (us). The concept of 600-ohm line matching

dates from the age of transformer-coupled telephone transmis-

sion lines and the necessity of optimizing telephony return loss

performance.
The analog line inputs accept “zero-VU” program levels be-

tween –15dBu and +15dBu, adjusted under Setup.

Unbalanced

Operation

It’s not uncommon for broadcasters to include consumer audio

products in their installations. There may be a legitimate rea-

son to feed the DAVID IV directly from a CD or MP3 player or a

computer sound card in, hopefully, a temporary or emergency

situation. Sufficient gain has been included to interface with

single-ended inputs in the –10dBV, consumer-level range.

For unbalanced inputs, the single center conductor of the

shielded lead should be connected to Pin 2 of the XLR plug, and

the shield braid split and connected both to Pin 1 and to Pin 3.

Содержание DAVID IV 719 N






























































Результаты поиска

Содержание DAVID IV 719 N

Отзывы:

Похожие инструкции для DAVID IV 719 N

Бренды по названию

Популярные бренды

Inovonics DAVID IV 719 N, Инструкция по установке и эксплуатации

Результаты поиска

Содержание DAVID IV 719 N

Отзывы:

Похожие инструкции для DAVID IV 719 N

Бренды по названию

Популярные бренды