Inovonics 531N, Инструкция по установке и эксплуатации, Страница: 43 / 60

— 41 —
Be sure to click:
Save
at the bottom of the window to commit
you choices to memory.
ADMINISTRATIVE SETTINGS
Password
The
Admin
Web screen allows you to set up a password for the
531N. Simply type the password into the
Password:
field, click:
Enable
, and the click:
Save
. You’ll be immediately prompted
with a pop-up window asking for a
User Name:
and
Password:
.
The
User Name
: is optional and may be left blank; it is not used
with any other 531N function at this time. Just enter your new
password in the
Password:
field. This pop-up will greet you
each time you launch the 531N Web pages. Again the
User
Name
: is optional.
You’ll probably notice that your password remains in plain
sight on this page. This is not a security breach, as you can’t
get to this page without first giving the password in the pop-up
window.
Lost Password
If you lose or forget your password, you must perform a ‘hard
reset’ on the 531N (see below). This will purge all setup and
other information from memory. To obviate this inconven-
ience, we recommend periodically downloading and saving a
Hardware Profile, which retains all the setup data and can be
uploaded back to the 531N. This procedure is described in due
course.
Of course the old, lost password
is part of the Hardware Profile,
so you must edit this file before
uploading it, otherwise you’ll be
back to where you started. The
snapshot at the right shows the
very bottom of the Hardware
Profile where the administrative
data is held. Note the numeral
‘1’ marked with the arrow. This shows that the password is en-
abled. Use MS Notepad or another text editor to change the one
to a zero. This turns password protection off. Re-save the ed-
ited file. You can now do a hard reset of the 531N and then up-
load the edited Hardware Profile. This will restore your previ-
ous settings, and even let you see the old password, which you
may use or replace.
Hard Reset
A hard reset of the 531N will purge all setup information from
memory. Please see the Hardware Profile discussion that fol-
lows to save settings and restore them to the 531N.
To perform a hard reset, hold down the far-right
SELECT
but-
ton
(14)
while power-cycling the unit. Remember, this restores
the 531N to ‘factory-fresh’ condition; you will lose all setup in-
formation.