Inovonics 531N Скачать руководство пользователя страница 41

Страница: 41 / 60

— 39 —

Setting

Mode:

Read & Write

allows the SNMP Manager to send

commands to the 531N. This allows other equipment to change

station Presets and adjust nearly all setup parameters of the

531N.

SNMP Security

SNMP ‘Communities’ serve as passwords for this function. Go

into the

Read Community:

and

Write Community:

boxes to enter

text that is specified for the read/write strings on the SNMP

Manager monitoring device. As with similar text-entry screens,

execute a

Save

after entering.

SNMP Traps

When the 531N initiates an alarm, rather than being queried or

polled for one, the alarm is known as a ‘trap.’ You may enter

three local network IP addresses as

Trap Destinations

, each cor-

responding to other devices on the LAN that want to be ap-

prised of alarms.

SNMP Ports

The default SNMP Ports,

General Port 161

and

Trap Port 162

, are

customary assignments for the majority of SNMP operations.

These may be changed as required by typing-in new values.

Downloading

the MIB File

The MIB file is a small text (.txt) file that is read by the network

controller, or SNMP Manager. To download and read this file

yourself, click:

Download MIB

. The file may be saved in the usu-

al Windows manner. The MIB file is in plain text and may be

read with Windows Notepad.

Further Study

The foregoing discussion of SNMP operation is purposely ab-

breviated. SNMP is a complex utility, managed exclusively by

whatever SNMP Manager (the monitoring equipment) is em-

ployed. Refer to published instructions for the SNMP Manager

in setting-up the 531N. From the active 531N SNMP browser

screen, you can download the MIB file to help unravel mysteries

in this regard as well.

EMAIL PREFERENCES

Set up the 531N for outgoing mail on the

Email preferences

Web

page.

Mail Server

Setup

The email server settings and email addresses for the various

recipients of email or SMS text messages are entered here on

the

Email Preferences

menu page; in other words, ‘who gets it

and how.’ However, the alarm preferences for email notifica-

tions, or ‘who gets which alarm message’ are set on the

Alarms

and Notifications

menu page. This is described under the discus-

sion of alarms on Page 51.

An example at the top of the next page shows typical setup for

an SMTP mail server. Mail server settings vary, but essentially

you create a separate email account for your 531N. The

User:

name can be anything you like, and will actually be the formal

name of the sender. But with most email clients, when emails

from the 531N are received the sender will be identified by the

Содержание 531N





























































Результаты поиска

Содержание 531N

Отзывы:

Inovonics 531N, Инструкция по установке и эксплуатации, Страница: 41 / 60

Результаты поиска

Содержание 531N

Отзывы: