
— 33 —
Section IV
NETWORK SETUP
CONNECTING WITH THE 531N
Up to this point we’ve used front-panel buttons and readouts to
get the 531N up and running. Most basic mod-monitor func-
tion may be accessed in this manner, but the Web interface
opens up a host of additional measurement features.
Connect
the 531N
Our first order of business is to get the 531N communicating
with your network. Connect the RJ45
NETWORK PORT
jack on
the back of the 531N to a LAN port of your server or router.
DHCP
Press the
NETWORK SETTINGS
button
(27)
once. The digital
LED frequency readout will switch from display of your fre-
quency, such as
95
.
9
, to
dHCP
. Press the
NETWORK SETTINGS
button once again and the display will probably show the de-
fault DHCP assignment:
On
.
At this point you may use the
ADJUST
buttons
(13)
to toggle
DHCP between
On
and
OFF
. Unless you need to assign the
531N a fixed IP address, you’ll want to leave the DHCP selection
On
so that your router or server will automatically assign con-
nection addresses to the 531N. Press the
NETWORK SETTINGS
button once again to return to a readout display of
dHCP
.
The IP Address
With
dHCP
showing on the readout, press the right-hand
AD-
JUST
button to bring
IP
onto the display. Press
NETWORK
SETTINGS
once, and the first address group of the current IP
will appear, very probably the digits
192
.
If the IP address is to
be assigned manually, DHCP would have been set to
OFF
, and
you would now be able to use the
ADJUST
buttons to set this
first group of three digits to any value between 0 and 255.
With DHCP
On
, however, this function is locked out.
With the first group of digits noted, pressing
NETWORK SET-
TINGS
once again will bring up the next three digits in the ad-
dress, perhaps .
168
. With DHCP set to
OFF
, this group of three
digits may be changed as described for the first group, and sim-
ilarly for the third and fourth groups.
Press the
NETWORK SETTINGS
button until
IP
returns to the
readout.
Gateway,
Subnet Mask
and Primary DNS
Now, with
IP
showing on the readout, press the right-hand
AD-
JUST
button to take you into the
GAtE
(gateway) setup area.
This area will be locked-out under DHCP control, but with
DHCP
OFF
, you may program the gateway address in exactly
the same manner as described for
IP
.
Содержание 531N
