Inoksan inosmart FKE 06, Руководство пользователя

Страница: 41 / 50

41
20.POSSIBLE PROBLEMS AND THE SOLUTIONS

If the equipment is at cooking mode but the oven door is not closed properly, then
the equipment will not operate. It should be paid attention that the door handle fits in
well.

During operation, if the door of the oven is opened, the operation stops. When the
door is closed, the equipment will resume.
If there is any breakdown of the equipment, the relevant error message is displayed.
You can find the explanation of the relevant error message in the list below.
Pay attention to the solutions according to the information of the
breakdown in the below table.
ERROR
CODE
ERROR MESSAGE POSSIBLE PROBLEMS AND SOLUTIONS
E100 CPU warmed too much Please get in touch with the authorized service !
E102 External Flash Memory Error Please get in touch with the authorized service !
E103
SDRAM Memory Error Please get in touch with the authorized service !
E104
SPI Flash Memory Error Please get in touch with the authorized service !
E106
Starting with Watchdog Please get in touch with the authorized service !
E107 Low Battery Voltage The problem of electronic card battery .
Please get in touch with the authorized service !
E108
Wrong connection of phase- neutral The electric connection of the Phase- Neutral network is
faulty and there is power failure of the network.
E109 Fuse blown The element of the overcurrent protection of electronic
control unit must be canged .
Please get in touch with the authorized service !
E110 Isolated 24Vdc Supply Error Power inlet problem of electronic card low voltage .
Power box unit must be controlled .
Please get in touch with the authorized service !
E112 Thermic Error Check the relevant outlet of the electronic card.
Check the fan motors of the cabinet .
Please get in touch with the authorized service !
E113 Electrical panel extremely hot
E113 - Panel temperature at the sill
level (Clean Fan Filter )
It breaks down when the ambient temperature of the
electronic card is over 60 ℃. The fan filter should be
cleaned , and after the cleaning , if the failure still
goes on, then please get in touch with the authorized
service.!
E114 Panel extremely hot ( Clean Fan
Filter ) E114 – Panel extremely hot (Clean the Fan Filter )
E212
Driver(s) can not found Check the model of the oven from the electronic control
unit. Observe that the error disappears by pressing
button “RESET”.
Otherwise please contact with the authorized service!
E213 Driver-1 Communication Error Check the connection between the control card and
speed control .
Observe that the error disappears by pressing button
“RESET”. If the error continues, please contact with
the authorized service!
E214 Driver -2 Communication Error Check the connection between the control card and