Inogen TAV, Инструкция по эксплуатации, Страница: 30 / 36

27
Appendices
Appendix A: EMC Information
GUIDANCE AND MANUFACTURER’S DECLARATION - ELECTROMAGNETIC
EMISSIONS
The TAV® system is intended for use in the electromagnetic environment specified below.
The user of this system should assure that it is used in such an environment.
Emissions test Compliance
Electromagnetic environment -
guidance
RF Emissions
CISPR 11
Group 1
The TAV® device uses RF energy only for its
internal function. Therefore, its RF emissions
are very low and not likely to cause any
interference in nearby electronic equipment.
RF Emissions
CISPR 11
Class B
The TAV® system is suitable for use in all
establishments, including domestic
establishments and those directly connected
to the public low voltage power supply
network that supplies buildings used for
domestic purposes.
Harmonic Emissions
IEC 61000-3-2
Not
Applicable
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Not
Applicable
Guidance and manufacturer’s declaration – electromagnetic immunity
The TAV® system is intended for use in the electromagnetic environment specified below.
The user of this system should assure that it is used in such an environment.
Immunity test
IEC 60601
test level
Compliance
level
Electromagnetic
environment -
guidance
Electrostatic discharge
(ESD)
IEC 61000-4-2
± 6 kV contact
± 8 kV air ± 6 kV contact
± 8 kV air Floors should be wood,
concrete, or ceramic tile.
If floors are covered with
synthetic material, the
relative humidity should be
at least 30 %.
Electrical fast transient/
burst
IEC 61000-4-4
± 2 kV for
power supply
lines
± 1 kV for
input/output
lines
Not
applicable
Not applicable.
This system does not have
power supply lines or input/
output lines.