Innova XTIRPA IN-8002, Инструкция и руководство по безопасности, Страница: 6 / 24

MU8002-012ENEU rev03 6
(the user attached to the lifeline cable or rope) and the other (attendant) pays out the line and
reels it in, keeps contact with the person inside and remains available in case of any emer-
gency. The attendant makes sure, at all times, that the user who is tying his lifeline cable or
rope to his EN 361-compliant harness is in the right position. The attendant also assures that
the XTIRPA system is well in place and that no load imbalance is possible.
IMPORTANT: During installation of the system, it is important to ensure stability through-
out.
h) Use only a certified full body harness in accordance with EN 361 and certified lifeline cables
and ropes for any user of the XTIRPA system, with appropriate specifications designed and
recommended for use in specialized work conditions such as those for which the XTIRPA
system is intended to be used as per this Instruction and safety manual. For the installation
of lifeline cables and ropes on the certified 13kN anchor points of the davit arm, see section
6 paragraph 5 and 6.
IMPORTANT:
When used as PPE, the system must be fitted with a device limiting the
dynamic forces exerted on the user to a maximum of 6kN (1320 LbF).
i) Plan your work program before starting. Have the required equipment, procedures and peo-
ple, which must be qualified and trained on the XTIRPA system and who must have read and
understood this Instruction and safety manual before using the XTIRPA system, available
to do the job.
j) Keep all instructional and safety labels on the XTIRPA system and its components and parts
clean and legible at all times. Clean or replace if required. New labels can be obtained upon
demand.
IMPORTANT : If the markings on the anchoring device are not legible after installation, it is
recommended that supplementary markings next to the anchoring device be made.
WARNING : All modifications of the equipment or all additions to the equipment shall not
be performed without the authorization of the manufacturer, and all repairs shall be done
as indicated by the operating mode of the manufacturer.
WARNING:
It is agreed and accepted that the use of the equipment (system) is limited to
a maximum of 2 people.
k) Do not exceed 420 lbs. (190 kg) per anchor point, equivalent to the system’s maximum work-
ing load.
l) Follow all applicable laws, regulations and standards for work in, entry in and exit from con-
fined spaces.
m) A person who has not read this instruction and safety manual, has not been trained in using
the XTIRPA system and does not understand all operation, safety, maintenance, servicing
and storage instructions contained in this Instruction and safety manual and in any other
recommendations provided by the manufacturer or its certified trainers is not qualified to op -