Innova XTIRPA IN-8002, Инструкция и руководство по безопасности, Страница: 3 / 24

MU8002-012ENEU rev03 3
INTRODUCTION
WARNING
The XTIRPA system is part of a personal protection equipment system for fall protection,
work positioning, or rescue, for use in confined spaces.
The user must read, understand and follow the manufacturer’s instructions for each com-
ponent or part of the complete XTIRPA system. These instructions must be provided to the
user of the XTIRPA system. The user must read and understand these instructions before
using the XTIRPA system. The manufacturer’s instructions must be followed for proper
use and maintenance of this product.
Alterations or misuse of the XTIRPA system or of any component or part thereof or failure
to follow instructions may result in serious injury or death, for which the manufacturer
disclaims all warranties and liabilities whatsoever, user, owner and purchaser of the XTIR-
PA system waiving all claims, rights and recourses against the manufacturer and derived
therefrom.
The XTIRPA System was engineered for people needing a personal protection equipment sys-
tem, a protection system against falls, a work and safety positioning system to be used in iso-
lation. The XTIRPA system was engineered to act as a supporting or anchoring structure for
these uses. The XTIRPA System is one of the lightest and most ergonomic systems to use in
its category on the market. The XTIRPA System meets the EN 795 standards: 2012 Type B and
TS 16415: 2013.
IMPORTANT : The buyer must complete and return the limited warranty registration form.
Always keep this Instruction and safety manual available to any worker needing to use the
XTIRPA system.
Before each use, the user must read, understand and follow the manufacturer’s instruction and
safety manual.
Keep instructional and safety labels apposed on the XTIRPA system and components and parts
thereof clean and legible at all times. Clean or replace if required. New labels can be obtained
upon demand.
Establish a regular training program on the XTIRPA system for new & experienced workers, as
further recommended in this Inspection and safety manual. Establish a detailed inspection pro-
gram for the XTIRPA system and document findings, as further recommended in this Instruction
and safety manual. Always inspect the XTIRPA system before each use and at least once a year
by a competent person.
The XTIRPA system and its components and parts have labels indicating the maximum capacity
of each. Exceeding said maximum capacity may result not only in damages to the XTIRPA sys-
tem or components or parts thereof but also in serious injury or death, for which the manufactur-
er disclaims all warranties and liabilities whatsoever, user, owner and purchaser of the XTIRPA
system waiving all claims, rights and recourses against the manufacturer derived therefrom.
The XTIRPATM Universal Safety system IN-8002, including components IN-2108, 1067mm
(42”) Portable Manhole Guard for Fall Protection & Retrieval and IN-2210, Davit Arm for Fall
Protection and Retrieval Including Secondary Block, conforms to document number MU8002-