Innova IN-8012, Инструкция и руководство по безопасности, Страница: 3 / 28

MU8012-002ANG Rev2 2016
P. 2
DESCRIPTION & INTERPRETATION OF
MARKING SYMBOLS
This symbol is used to alert the user to a potential hazard. The safety of the worker is in
jeopardy. It is imperative to follow the manufacturer’s recommendations.
This symbol asks the user to read and understand the manual for this product before use.
This symbol specifies that the system should be used by a single user.
-1-
APPLICATION
The XTIRPA

System, and its many components and parts (including davit arm, manhole guard,
removable adapter, permanent adapter, integrated mast and side entry cart), are intended to be used as
part of a personal protection equipment system for fall protection, work positioning, personnel handling,
materials handling, or rescue, for use in confined spaces. The
XTIRPA

System is intended to act as a
support structure or anchor for these uses.
-2-
RESTRICTIONS
a) CAPACITY: The maximum working load for this product is 360 lbs (164 kg).
According to (ANSI, OSHA, CSA).
According to
EC (EN 795: 2012), use an EN-360 and/or EN-363 fall protection system
or an EN-1496 recovery system.
b) The manufacturer attests that anchoring devices have been tested accordingly to the current European
standard (EN 795:2012 Type A, Type B and Type E) and, except otherwise stipulated, they are to be
used by a single person using a shock absorber in accordance with regulation EN 355.
c) PRECAUTIONS: Take the necessary precautions to limit injuries to the user and risks of damaging
the
XTIRPA

System.
d) Use of the
XTIRPA

System in areas where environmental hazards exist may require additional
precautions to limit the possibility of injury to the user or damage to the XTIRPA

System. Hazards
may include, but are not limited to: high heat, fire, flame, smoke, fumes, caustic chemicals, corrosive
environments, high voltage power lines, sudden changes of pressure, explosive or toxic gases or
substances, water or risks of flooding, risks of wall, ceiling or floor collapsing, moving machinery and
sharp edges.
e) Install and secure all signaling and other precautionary and security measures, including but not
limited to, notifying users, bystanders and vehicle operators circulating near the
XTIRPA

System of
the presence of the XTIRPA

System and its workers, before starting work.