Innova DUCTO - SLC, Инструкция по установке, использованию и техническому обслуживанию, Страница: 28 / 33

Page 28
7 MAINTENANCE
To always ensure correct and optimal operation of the unit, all maintenance interventions must be carried out periodically.
7.1 CLEANING OR REPLACING FILTERS
VERSION WITHOUT ACCESSORIES
To replace the filters or to clean them, proceed as follows:
• disconnect the unit from the power supply;
•
open the filter covers using the dedicated knobs;
• remove the dirty filters;
• insert clean or new filters carefully;
•
close the lid with the dedicated knobs;
If the conditions of the filters allow it, they can be cleaned using a vacuum cleaner or a
low pressure compressor.
WITH AIR INTAKE PLENUM
If the air intake plenum accessory is present, the filter can be extracted as shown in
the figure to the side.
To replace the filters or to clean them, proceed as follows:
•
disconnect the unit from the power supply;
•
open the filter covers using the dedicated knobs;
• remove the dirty filters;
•
insert clean or new filters carefully;
• close the lid with the dedicated knobs;
If the conditions of the filters allow it, they can be cleaned using a vacuum cleaner or a
low pressure compressor.
View for filter extraction