101
InnoMedia, Inc
.
All Right Reserved
Table 30. ADSL Link Status
Step
Action
1
Open your web browser and connect to your SIP Device.
2
Click on ADSL, then ATM Config. The ATM configuration page
appears.
3
Select Annex Mode from the drop-down menu.
4
Enable or disable the VCCs by checking or un-checking the
Enabled boxes.
5
Select Bridged for the Protocol. MTA supports only Bridge mode.
6
Select the LLC for Encap Mode from the drop-down menu.
7
Modify the Cell Rate, Peak Cell Rate, and Sust. Cell Rate as
needed.
8
In PVC Traffic Mapping, enter the VCC values in the fields.
9
Click the Save button to save your changes, or click the Reset
button to undo your changes.
Figure 35. Configuring ATM Settings
Telnet/ HyperTerminal Interface
ADSL Setting (Pd)
Use the
“
Pd
”
command to view the ADSL link status. The information refreshes only
when you reboot the system or the MTA is being re-trained. Please contact InnoMedia, if
you need to use “r”, “w”, and “c” commands.
