20
GB
The symbol
indicates the ambient
temperature measurement.
N.B.: You can set the body or surface
measurement mode by pressing the
SET button three times. When “F03 °C”
is displayed on the screen (see Fig. G),
just press the “-” key to set the body
temperature detection mode or the
“+” key to set the surface temperature
detection mode.
Depending on the measurement mode
set, the display will show the symbol
or
.
• Changing the unit of measurement:
Press the SET key once, the display will
show “F01 °C” (see Fig.E). Press the “+” or
“-” key to change the unit of measurement
from °C to °F.
• Set the desired temperature
threshold: Press the SET key twice, when
the “F02 ° C” symbol appears on the screen
(Fig.F) you can press the “+” or “-” key to set
the temperature threshold desired. For
example, if you set 38.0 ° C as temperature
threshold, the screen will turn red when
the device reaches this temperature.
• Temperature correction: Press the SET
key four times, when the display shows
“F04 °C” (Fig.H) press the “+” or “-” key
to increase or decrease the value of the