INNACOMM W3400 Скачать руководство пользователя | Manualshive

Страница: 70 / 70

background image

User Manual

64

Regulatory information / Disclaimers

Installation  and  use  of  this  Wireless  LAN  device  must  be  in  strict  accordance
with  the  instructions  included  in  the  user  documentation  provided  with  the
product.  Any  changes  or  modifications  (including  the  antennas)  made  to  this
device  that are not expressly  approved  by  the  manufacturer  may  void  the  user

’

s

authority  to  operate  the  equipment. The  manufacturer is  not  responsible  for  any
radio  or  television  interference  caused  by  unauthorized  modification  of  this
device,  or  the  substitution  of  the  connecting  cables  and  equipment  other  than
manufacturer  specified.  It  is  the  responsibility  of  the  user  to  correct  any
interference  caused  by  such  unauthorized  modification,  substitution  or
attachment. Manufacturer and its authorized resellers or distributors will assume
no liability for any damage or violation of government

CAUTION: To maintain compliance with FCC

’

s RF exposure guidelines,

this  equipment  should  be  installed  and  operated  with  minimum  distance
20cm  between  the  radiator  and  your  body.  Use  on  the  supplied  antenna.
Unauthorized  antenna,  modification,  or  attachments  could  damage  the
transmitter and may violate FCC regulations.

MPE Statement (Safety Information)

Your device contains a low power transmitter. When device is transmitted it
sends out Radio Frequency (RF) signal.

Safety Information

In  order  to  maintain  compliance  with  the  FCC  RF  exposure  guidelines,  this
equipment  should  be  installed  and  operated  with  minimum  distance  20cm
between  the  radiator  and  your  body.  Use  only  with  supplied  antenna.
Unauthorized antenna, modification, or attachments could damage the transmitter
and may violate FCC regulations.

«
...
68
69
70

Содержание W3400







































































Отзывы:

Нет отзывов

Похожие инструкции для W3400

EtherLink 3C509B

Бренд: 3Com Страницы: 8

QSR-3920 Series

Бренд: QTech Страницы: 120

Transportation FiberinMotion

Бренд: Radwin Страницы: 122

Wireless Mini PCI Module

Бренд: E-Tech Страницы: 42

Net2Air Ins-40085-US

Бренд: Paxton Страницы: 4

Бренд: ZyXEL Communications Страницы: 215

Бренд: Patton electronics Страницы: 9

Бренд: Qlogic Страницы: 8

Бренд: Gira Страницы: 6

Бренд: Lutron Electronics Страницы: 4

UniFi WiFi BaseStation XG

Бренд: Ubiquiti Страницы: 19

Emotron OSTO 100

Бренд: CG Страницы: 112

OptiBond 210 C Series

Бренд: i-MO Страницы: 16

Бренд: Aviosys Страницы: 77

Network Adapter ADZIFCF

Бренд: Addonics Technologies Страницы: 1

Бренд: Juniper Страницы: 396

VAR-SOM-MX8M-PLUS

Бренд: Variscite Страницы: 2

Бренд: Telestar Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды