INNACOMM W3400, Руководство пользователя

Страница: 43 / 70

User Manual
37
Field Description
Encapsulation You can choose LLC or VC-Mux.
Channel Mode
You can choose 1483 Bridged, 1483 MER,
PPPoE, PPPoA and 1483 Routed.
Admin Status Select Disable, this PVC is unusable.
Enable NAPT
Select it to enable the NAPT function of the
router. If you do not select it and you want
to access the Internet normally, you must
add a route on the uplink equipment.
Otherwise the access to the Internet fails.
Normally, it is required to enable NAPT.
User Name
The correct user name that your ISP has
provided to you.
Password
The correct password that your ISP has
provided to you.
Type
You can choose continuous, connect on
demand and manual.
Idle Time(min)
If select connect on demand, you need to
enter the idle timeout time. Within the
preset minutes, if the router does not
detect the flow of the user continuously, the
router automatically disconnects the
PPPOE connection.
WAN IP Settings
Type
You can choose fixed IP and use DHCP. If
select fixed IP, you should enter the local
IP address, remote IP address and subnet
mask. If set use DHCP, The router is a
DHCP client, the WAN IP is assigned by
the remote DHCP server.
Local IP Address
It is the IP address of WAN interface which
is provided by your ISP.
Remote IP Address
This is the gateway IP address which is
provided by your ISP.
Subnet Mask It is the subnet mask of the local IP