29
12.
Refit the Needle bar retainer assembly
by placing the Retainer spring
in the
groove of the Needle bar retainer
. Push the Retainer fix. screw
through the
first hole opposite of the retainer bearing side, trough the retainer spring and into the
second hole. Leave the retainer fix screws end flush to the needle bar retainer surface
on the bearing side. Put the needle bar retainer assembly in the groove of the
Frame
and slide it back into place. Make sure that the Retainer spring
engages
correctly with the
Frame
. Hold it in place while tightening the Retainer fix screw
.
1
2
3
4
5
6
Screw flush
Engage spring in groove
Содержание Dragonfly X2
Страница 31: ...31 Part names Note Parts without numbers are not included in the purchase...
Страница 32: ...32...