21
Disassemble instructions
1.
Remove the Cap
by pulling it off. Unscrew the Adjustment screw
and take
out the Inner piston spring
.
2.
Use the matching Allen key
to loosen the Piston screw
in the Inner piston
.
Take out the Needle bar pin
.
3.
Push out the Inner piston
and pull out the Noise damper O-ring
from the
bottom of the Piston
.
4.
Refit only the Adjustment screw
a few turns and push the Piston assembly
down to the bottom position by pushing on the top of the adjustment screw.
Содержание Dragonfly X2
Страница 31: ...31 Part names Note Parts without numbers are not included in the purchase...
Страница 32: ...32...