![background image](http://html1.mh-extra.com/html/inkmachines/dragonfly-x2/dragonfly-x2_manual_2061834025.webp)
25
4.
Align the Connecting rod
with the groove in the Piston
. Position the Motor
assembly
in or out so that the connecting rod lines up with the center of the
groove in the piston. It´s important that there is no tension between the components.
Tighten the Motor fixing screws
and Contact screw motor negative (-)
.
5.
Push the Piston
down and insert the Connecting pin
through the hole in the
neck of the
Frame
. Align the hole in the piston with the hole in the upper bearing
of the Connecting rod
. Push the Connecting pin
trough and to its bottom
location with the far end of an Allen key
.
Tighten gently
Содержание Dragonfly X2
Страница 31: ...31 Part names Note Parts without numbers are not included in the purchase...
Страница 32: ...32...