Inkbird ITC-608T, Руководство пользователя

Страница: 32 / 54

30
2 Button Operation Instructions
2.1 Restore Default Data
Press the “ " button to power on, the buzzer will make a
short call, indicating that all parameters of both temperature
probes function return to the default setting value.
2.2 Button Function in Normal Operation Mode
Press “ ", PV shows temperature setting value of probe 1, it
will be back to the normal display if there is no operation for 3
seconds or pressing the "
SET
" button. Press “ ", SV shows
temperature setting value of probe 2, and it will be back to the
normal display if there is no operation for 3 seconds or
pressing the "
SET
" button.
2.3
Tap “
SET
” button to enter the mode for setting tempera-
ture value. SV shows the temperature setting value of probe 1
and flashes, at this time quickly press “ ” or “ ” button to
increase or decrease the setting value, long press “ ” or
“ ”button to quickly increase or decrease the setting value;
and then press “
SET
” again, SV shows the temperature
setting value of probe 2 and flashes, at this time quickly press
“ ” or “ ” button to increase or decrease the setting value,
long press “ ” or “ ”button to quickly increase or decrease
the setting value, finally press the “
SET
" button again to
confirm and exit. If there is no operation, it will automatically
exit after 10 seconds and save the setting value.
2.4 Dual Temperature Probes Function Setting
When the controller is working normally, press and hold
the“SET”button for 2 seconds to enter the setting mode. PV
shows the code“CF”of the first menu item, and SV shows the
corresponding setting value. Press the“SET”button to scroll
down the menu item and save the parameters of the previous
menu item. Press the“UP”or“DOWN”button to change the
current setting value. If there is no button operation within 30
seconds or long press "SET" button for 2 seconds in the
setting state, it will save the parameters and exit the setting
state, then return to the normal working mode.