INIS Meain MK2, Руководство пользователя и инструкция по установке

Страница: 9 / 16

9
Inis Meain MK2 Roomheater stove
correct and thorough cleaning of the
entire stove.
Trouble shooting
NOTE: Excess fume emission
to the room must not be
tolerated.
Fire burns very rapidly and refuelling
periods are not being met.
1 Chimney draught is very high, chimney
damper may be required.
2 The fuel load is too small for the
damper setting.
3 Door seals are worn.
4 Adjust the damper for proper fire
control.
Fire will not burn properly
1 Chimney draught is too low
2 Damper is closed
3 Excessive horizontal flue used in rear
flue connection
4 Ash covering all air ways into firebox
5 Chimney and/or stove blocked with ash
or foreign body
6 Fuel is wet
7 No air vent present in room
8 Extractor fan in use
Stove emits fumes
1 Chimney blocked
2 Door seals require replacing
3 Excess down draught in chimney
4 Chimney draught below 10Pa.
Riddler grate is locked up/ won‟t
operate.
1 A foreign body like a stone or
steel nail has jammed the riddler
assembly. Dis-assemble the riddler
mechanism and check.
Glass blackens excessively
If the stove is fitted correctly and
the correct lighting and operation of
the stove is adhered to, blackening of
the glass should always burn off after a
period of full output. A poor draught
and/or the use of wet or improper fuel
will often lead to excessive glass
blackening.
Chimney fire
If the stove and chimney are kept
clean, no fire should occur. If
however it does happen, close the
stove damper fully, close the stove
doors tightly. Only once the fire in
the stove and chimney has gone out
should the stove be opened and the
stove and chimney cleaned thoroughly.
If the fire is substantial and doesn‟t
extinguish, the fire brigade should be
called. After a chimney fire, expert
help should be sought to have the
chimney examined for any damage before
the stove is used again.