INIM snartliving, Руководство пользователя

Страница: 34 / 44

34 Using the system
User’s Manual
5-13
Partition status enquiry
This function can be activated over-the-phone only.
The Partition status enquiry function allows you to listen to voice
announcements regarding of the armed/disarmed status of the partitions
during telephone communications with the control panel, or by activating
the corresponding shortcut from a JOYMAX keypad. The control panel will
announce the armed/disarmed status of the partitions the entered PIN is
assigned to.
Note
If you activate this shortcut from a JOY/MAX keypad, the control panel will
announce the armed/disarmed status of the partitions the entered PIN is assigned
to, regardless of the keypad partitions.
The user code must be enabled (by the installer) to activate shortcut n.17
on the function
or number keys.
over the Phone
Type-in the PIN of a user code followed by “#” (the user code must be
enabled to operate the system over-the-phone), then press the key (from
“0” to “9”) which the installer has programmed to activate “Arming status”
(shortcut n.17). The control panel will announce (in order) the descriptions
of the partitions the entered PIN is assigned to and their current armed/
disarmed status.
Press “*” to step back to the main menu to listen to all the voice
announcements relating to the entered PIN.
Via Keypad
After entering a valid user-code PIN, press the key which is assigned to the
“Arming status” shortcut (shortcut n.17). The control panel will announce
(in order) the descriptions of the partitions the entered PIN is assigned to
and their current armed/disarmed status.
5-14
Commands over-the-phone
5-14-1
Panel to user calls
Your installer will instruct you as to which events generate voice calls.
Event report calls will be sent to the programmed contact numbers of your
choice when the event occurs and, in most cases, also when it ends.
During the call, the call recipient can:
• press “
* ” to go to the next message or, if there is only one message,
end the successful call.
• Type-in a valid PIN followed by “ # ” and access the customized shortcuts
assigned to the code. The control panel will activate the voice guide
which will announce the available shortcuts and the number keys to
press. The control panel will activate the corresponding shortcut as soon
as the selected number is pressed on the telephone keypad.
5-14-2
User to panel calls
If the “Answerphone” function (refer to paragraph 5-4 Activations ) is
enabled, users can call the control panel from any remote telephone and
send commands to the system (refer to paragraph 3-2 Shortcut with code )
and/or activate Listen-in sessions (refer to paragraph 5-12 Listen-in ) in the
following way.
1. Dial the control panel telephone number.
2. Allow the phone to ring for the pre-established number of rings. The
control panel will answer and will play message n.216.
3. Type in your PIN followed by “ # ”.
4. The control panel will activate the voice function which will announce
the available shortcuts and the number keys to press.
5. As soon as the selected number is pressed on the telephone keypad,
the control panel will activate the corresponding shortcut.