INIM snartliving, Руководство пользователя

Страница: 16 / 44

16 The SmartLiving System
User’s Manual
Note
If an operation is successful, but the corresponding LED fails to light, it is an
indication that the battery is low.
The battery must be replaced before it runs out completely.
2-7
Multi-system access
Users can access several systems using the same code/key/keyfob. The
user code, key or keyfob must be enrolled separately on the control panels
concerned, and can be programmed with different attributes and functions
in accordance with the requirements of each specific system.
The keys and codes provide the systems with random codes (for keys) or
PINs (for codes) which the system associates with the respective attributes
and functions programmed by the installer. For example, a user key/code
may be enabled on partitions 1 and 2 on system A, on partitions 7, 8 and
9 on system B and on partitions 4 and 5 on system C.
This operating method is possible for all keys and codes.
2-8
Telephone functions
Each SmartLiving control panel events can be associated with report calls
to an Alarm Receiving Centre (via a digital dialer) and to contact numbers
(via a voice dialer). The SmartLiving control panel also accepts commands
over-the-phone. Commands can be sent during calls to/from the control
panel, after valid PIN entry on the telephone keypad.
The commands can be activated by keys “0” to “9” on the telephone
keypad, which the system associates with various shortcut actions. Each
code can be programmed with customized shortcuts, such as: arm, disarm,
activate/deactivate outputs, delete alarm memory, etc.
If the system is equipped with a SmartLogos30M voice board, the code
shortcuts assigned to keys “0” to “9” will be announced over-the-phone, in
order to facilitate operations.
Additionally, the Listen-in function allows you to eavesdrop on the
protected premises by means of the keypad microphones.
Table 7:
Feedback signals provided by KF100 wireless keyfob
Push
button
Icon LED 1 LED 2 LED 3 LED 4 Buzzer signal Operation
1 flash beep Shortcut activation 1
1 flash beep Shortcut activation 2
1 flash beep Shortcut activation 3
1 flash beep Shortcut activation 4
+
+
1 flash 1 flash beep Block/Unblock keyfob
any 4 flashes 4 flashes Keyfob blocked
Feedback from panel
Confirmation LED -
green
Confirmation LED - red Buzzer signal
Command not
received
1 flash
Operation not done 4 flashes
bop (audible
error signal)
Operation done 3 flashes long beep