INIM snartliving, Руководство пользователя

Страница: 26 / 44

26 Using the system
User’s Manual
5-4
Activations
The activation/deactivation of the SmartLiving system peripherals and
elements (described in the following section) enables them to operate in
accordance with their settings (activation) or disables their functions
completely (deactivation). The user has full control over activation/
deactivation of the SmartLiving system peripherals and elements.
The following section describes the consequences of activation/
deactivation.
•
Zone - a deactivated zone (bypassed zone) cannot generate alarms.
• Auto-arm operations - can be activated/deactivated separately on
each single partition If this option is enabled on a partition, it will arm
and disarm in accordance with the On/Off settings of the respective
timer.
• Codes - deactivated (disabled) codes cannot access the system.
• Keys - deactivated (disabled) keys cannot access the system.
• Keypads - deactivated (disabled) keypads cannot provide access to the
system, therefore, cannot generate commands or shortcuts. However,
the LEDs and display continue to signal the current status of the
system.
• Readers - deactivated (disabled) readers cannot provide access to the
system, therefore, cannot accept keys or generate commands.
However, the LEDs continue to signal the current status of the system.
• Timers - activated timers (On) manage their associated elements
(partitions, codes, keys) in accordance with their settings. Deactivated
timers cannot time-manage their associated elements (partitions,
codes, keys), therefore, they will function in accordance with Timer Off
status.
Note
All the timers will be activated automatically when you exit the programming
session. You must deactivate timers which are not used for system control
purposes.
• Dialer - a deactivated (disabled) dialer cannot send voice or digital
calls. However, if duly programmed, it will be able to manage incoming
calls.
• Answerphone function - if activated (enabled), the control panel will
answer incoming calls with the pre-recorded voice message
(“Answerphone message”).
• Teleservice - if activated (enabled), the installer will be able to access
the system via modem. The Teleservice call allows the installer to work
on the control panel parameters. Teleservice operations involve a
request from you and the installers acceptance, therefore, this option
needs to be enabled only when required.
Note
If the“Answerphone” and “Teleservice” functions are both enabled, the control panel
will give incoming-call priority to the Teleservice call. After picking up the call, the
control panel will allow the installer-company modem 30 seconds to establish
communication. If the modem fails to communicate within this period, the control
panel will play the pre-recorded “Answerphone” voice message.
• Internet Access - If this option is enabled, and the system is equipped
with a SmartLAN/G board, the control panel will allow user-authorized
access to the system via LAN/Internet. If this option is disabled, the
control panel will allow user-authorized access to the system via
Teleservice (if authorized).
Via Keypad
Method 1
Activate the shortcuts associated with keys to (shown on the
display) with or without code entry.
• The shortcut assigned to the “Activations menu” (shortcut n.15: ),
allows you to view the respective section in the User Menu.
1. Use keys and followed by , to select the category of
elements (zones, codes, etc.) you wish to activate/deactivate.
1 8 : 2 3 2 0 / 0 8 / 2 0 0 8
D D D D D D D D - -
C o d e R u p e r t
A r m / D i s a r m o p s .
V o i c e f u n c t i o n s
A c t i v a t i o n s
Method 2.
T y p e - i n C o d e
* * * * * *
Method 1.
A C T I V A T I O N S
Z o n e s
C o d e s
K e y s
Z O N E A C T I V A T I O N S
P a n e l T 0 1
P a n e l T 0 2
P a n e l T 0 3