INIM Flex5/R Скачать руководство пользователя страница 10

Страница: 10 / 20

2. Installation of Flex5/R

Cable

AF CEI 20-22 II

number of conductors

section (mm2)

I-BUS terminal

6 wire cable + shield

0.5

+ -

0.22

D S

0.22

available

6 wire cable + shield

0.75

+ -

0.22

D S

0.22

available

Communication speed over the BUS
This parameter can be changed by means of the programming software (38.4, 125 or 250kbs).

BUS speed

maximum admissible length

(sum of the sections downstream of the control panel or of an isolator)

38.4kbps

500m

125kbps

350m

250kbps

200m

BUS sizing

Number and distribution of IB200 isolators.
To increase the reliability and the extension of the BUS, it is necessary to use isolators.

2.4 Flex5/R project

After installing the control panel peripherals and connecting them to the BUS, it is necessary to allow the

control panel to recognize and distinguish one from another in order for them to be placed in the con-

figuration.
This is possible firstly by assigning an address to each peripheral.
The addressing procedure changes in accordance with the type of peripheral. The types available are:

keypads (both with keys and LCD display and also with touch-screens)

proximity readers (both stand-alone and integrated into keypads)

expansions (both with input/output and relay terminals)

sounder/flasher

home-automation modules

thermostats

wireless transceivers

Warning

Peripherals of different types can have the same address, whereas peripherals of the same

type must always have different addresses.
Wireless transceivers must have different addresses from those of readers and expansions.

After assigning all the addresses, it is necessary for the control panel to carry out the peripheral enrolling pro-

cedures in order to include them in the system configuration that the control panel will manage.

Installation and programming manual- 101

Содержание Flex5/R





















Результаты поиска

Содержание Flex5/R

Отзывы:

Похожие инструкции для Flex5/R

Бренды по названию

Популярные бренды

INIM Flex5/R, Инструкция по установке и программированию

Результаты поиска

Содержание Flex5/R

Отзывы:

Похожие инструкции для Flex5/R

Бренды по названию

Популярные бренды