InHand ER805 User Manual
36
After you set the mail server address, port, user name, and password, the router uses the specified mailbox to
send alarm emails. You can send a test email to check whether the mail server configuration is correct.
Figure 13-7-b Mail server settings
13.8 Tools
13.8.1 Ping
The ping service is used to test the connectivity between the router and external networks through the
Internet Control Message Protocol (ICMP). Enter any domain name or IP address in the
Target
field, and
then click
Start
to test the connectivity with this target.
Figure 13-8-1 Ping
13.8.2 Traceroute
Enter the IP address of the target host, select an interface, and then click
Start
to test the route to the
destination IP address.
