InHand ER805 User Manual
5
4 Quick Network Connection
4.1 Environment Setup
Step 1: Install the 4G/5G and Wi-Fi antennas, and insert SIM cards into the router.
Step 2: Connect the power cable and Ethernet cable, and connect any of LAN interfaces to a PC.
Step 3: Assign an IP address to the PC, which must be in the same network segment as the router.
As the dhcp server function is enabled by default on the LAN interface, the PC must be in the same network
segment as the router. On the PC, set
IP address
to any value in the range of 192.168.2.2–192.168.2.254,
Default gateway
to 192.168.2.1,
Subnet mask
to 255.255.255.0,
Preferred dns server
to 8.8.8.8, and
Alternate dns server
to the IP address of the carrier's dns server.
Figure 4-1-1 Dynamic/Manual IP address configuration on the PC
Step 4: Start the web browser and enter the router's default IP address 192.168.2.1 in the address box. On the
login page that appears, enter the user name and password (
adm
/
123456
by default) to log in to the
web-based management system of the router. If the web browser displays a message, indicating that the
website is not secure, unfold the hidden or advanced settings and choose to continue.
Figure 4-1-2 Login to the web-based management system
