InHand ER805 User Manual
25
Figure 10-2-2 L2TP server configuration
Name
: displays the name of the L2TP server, which cannot be changed.
Status
: enables or disables the L2TP server function. This function is disabled by default.
Uplink Interface
: specifies the uplink interface used to establish a tunnel from the L2TP server.
VPN Address
: specifies the gateway address for the L2TP client. The gateway assigns an IP address to the L2TP
client from the specified IP address pool.
Address Pool
: specifies the IP address range for the L2TP client.
User Name/Password
: specifies the user name and password for L2TP negotiation, which must be consistent on
both ends of the tunnel.
Authentication
: specifies the authentication mode for the L2TP tunnel.
Enable Tunnel Authentication
: when this option is selected, make sure both ends of the tunnel are configured
with the same user name and password.
