InHand ER805 User Manual
6
4.2 Internet Connection
The ER805 can connect to the Internet via three types of interfaces, each allowing for multiple connection
methods. The router has two default uplink interfaces WAN1 and Cellular, which cannot be removed. It
supports a maximum of four uplink interfaces, namely, WAN1, WAN2, Cellular, and Wi-Fi(STA). WAN2
and Wi-Fi(STA) need to be added manually and can be removed.
4.2.1 Wired Connection Via a WAN Interface
The ER805 can establish a wired connection through DHCP, a static IP address, or PPPoE. To select a
connection method, click
【
Internet
】
on the left pane, and then click
Edit
in the row of WAN1
Figure 4-2-1-a Editing interface WAN1
DHCP: The DHCP service is enabled on the WAN interface by default. Therefore, the router can
connect to the Internet immediately when the WAN interface is connected to the Internet with an
Ethernet cable.
Static IP address: Manually assign an IP address obtained from the carrier or upstream network device.
Then, the router can connect to the Internet using this static IP address.
