941256_00(1) Page 3 of 4
For hex dogging application, go to step 7. For cylinder dogging application, go to step 5.
Reverse mortise cylinder cam as shown (with key removed).
4
5
Mortise
cylinder
Cylinder
collar
CD cover
plate
Cylinder
locating
washer
Cylinder
lock nut
Make sure cylinder cam is
installed in correct direction as
shown with key removed
Key removed
6
Install mortise cylinder into cover plate and verify that cam is correct direction.
Install batteries and battery retainer.
7
A.
Remove retainer
Key needs to be
rotated 180 degrees
for cam to clear
cylinder lock nut.
B.
Install three AAA batteries
C.
Install retainer
IMPORTANT