Ingersoll-Rand R4-11 kW, Информация по техническому обслуживанию продукции

Страница: 3 / 80

80448517 Rev A EN-3
EN
AIR COMPRESSOR MAINTENANCE
„
Maintenance Prompts
The service warning and flashing LED will appear at intervals dependent
on the service level selected. Refer to the Product Information manual for
information about service level settings.
„
Maintenance Chart
Maintenance should be performed per the recommendations below in the
following priority: (1) Perform maintenance when indicated by the controller;
(2) Perform maintenance through either hourly intervals or scheduled
maintenance intervals, or (3) Annually.
Table 2: Maintenance Chart
Period Action Maintenance Item
Daily
Check Connections and hoses for leaks
Check Coolant level
Check Condensate drain operation
Check Controller for service indicators
Check Package pre-filter for blockage
Monthly
Inspect Air-cooled combination cooling system for blockage
Inspect Starter box power drive element (PDM) filter element (if applicable)
Every 1000 hours
Inspect Air filter element
Analysis Food-grade Lubricant (Ultra FG)
Every 2000 hours or
3 months
Inspect Starter box power drive element (PDM) filter element (if applicable)
Inspect Drive belt
Inspect Airend/Pressure System/Receiver
Inspect Inspect and test pressure relief valve
Replace Air filter element
Replace Package pre-filter element
Replace Separator element
Replace Coolant filter element
Analysis Shock pulse bearing
Analysis Premium Coolant (Ultra/Ultra EL)
Every 4000 hours or
6 months
Inspect Scavenge tubes/orifice and blowdown orifice for blockage
Replace Starter box power drive element (PDM) filter element (if applicable)
Clean Air-cooled combination cooling system
Calibrate Pressure transducers (only applies to compressors equipped with Xe-70M controller)
Replace Dryer filter elements (if applicable)
Every 6000 hours
Replace Food-grade Lubricant (Ultra FG)
Every 8000 hours or
annually
Replace Premium Coolant (Ultra) [8000 hours or every 2 years]”
Replace Minimum pressure check valve (MPCV)
16000 hours or 2 years
Replace Drive belts
Replace Extended Life Premium Coolant (Ultra EL) [16000 hours or every 3 years]”
Replace Rubber Coolant Hoses
24000 hours or 3 years Replace Contact tips
40000 hours or 5 years
Replace Stainless Steel Coolant Hoses
NOTICE
Inspect and replace air filtration, coolant and separator elements more frequently in dirty operating environments
RELEASED 16/Dec/2014 10:49:53 GMT