18
Danger
Please utilise extreme caution when performing work within the compressor. Wear
appropriate PPE
(Personal Protective Equipment)
, follow
lock out-tag out
procedures, and
ensure all safety procedures
.
1.
Turn the “On/Off” switch to the OFF position (phase II and
Nirvana), press the E-stop, remove compressor canopy
and then insert the Intelli Key.
2.
Firmly press the Intellikey once and HOLD for three seconds
then release. Pause for one second and press again for one
second then release.
A green light will lit on the Intellikey and will stop after about 10s
confirming that the desired settings have been successfully
down loaded into the compressor. The Intellikey should now be
removed.
3.
The Unigy compressor now has the desired customized settings and
is now ready for operation. You will now, need to set the desired
pressure by rotating the potentiometer and select the compressor
fixed or variable speed with the toggle switch.
Down for variable speed, and Up for fixed
speed.
RJ45 connector is used for the Intellikey
and the read only CDC.
The potentiometer is for setting the desired pressure, by rotating Left or Right.
Always check: Intellikey being used is compatable with the Machine.
Appendix 4
