Ingersoll-Rand LCA750T, Информация по техническому обслуживанию продукции

Страница: 4 / 16

INSPECTION REPORT
Ingersoll Rand LCA750T Liftchain Air Hoist
Model Number: Date:
Serial Number: Inspected by:
Reason for Inspection: (Check Applicable Box)
1. Scheduled Periodic Inspection ( ___ Quarterly ___ Semiannually ___ Yearly)
Operating Environment:
Normal ___ Heavy ___ Severe ___
2. Discrepancy(s) noted during Frequent Inspection
3. Discrepancy(s) noted during maintenance
4. Other: ___________________________
Refer to the Product Information Manual for frequent ”INSPECTION” criteria. Also, refer to appropriate National Standards and Codes of practice. If in doubt about an existing
condition contact the nearest
Ingersoll Rand Distributor or factory for technical assistance.
COMPONENT
CONDITION CORRECTIVE ACTION
NOTES
Pass Fail Repair Replace
Fasteners
Gears
Shafts
Bearings ---
Load Bearing Sheave
Chain Guides
Springs ---
Covers, Housings
Hooks ---
Bottom
Actual Hook Throat Width: ________ inches / ________ mm
(Refer to Table 3 for minimum/maximum acceptable widths.)
Hook Twist
--- (maximum 10%)
Hook Crack Test Method Used: Dye Penetrant ________ Magnetic Particle ________ Other: ________
Hook Latch ---
Brake (100% Load Test) ---
Brake (Visual Inspection)
Tail Pin (End Anchor)
Load Chain: ---
Working length(s) maximum wear: ________ inches / ________ mm (Refer to Table 4 ‘Load Chain Normal and Discard Length’ on page 2)
Supporting Structure
Labels and Tags ---
Other Components (List in NOTES
section)
Testing: Pass Fail NOTES
Operational (No Load)
Operational (100% Load)
Operational (Maximum Test Load*)
* Testing to more than 100% of rated capacity may be required to set overload device.
This form may be photocopied and used as an inspection record.
4 Form MHD56416 Edition 1